Precious Metal Verifier

Original

The Precious Metal Verifier Features:

  1. Detects and prevents precious metal fraud.

  2. Can assist in determining numismatic authenticity.

  3. Reads the metal bulk - not coatings or plating.

  4. Can read through packaging.

  5. Very fast - 1 second results.

  6. No wet chemistry, no consumables, no scraping or filing

  7. Can be used with over 20 precious metals and metal alloys

  8. Inexpensive to buy and use.

  9. Portable - long battery life.

  10. Durable - no maintenance required.

  11. Wands add versatility and usability.

The Precious Metal Verifier measures the bulk metal in a bullion bar or coin and ensures that the metal matches the expected electrical characteristics of the selected metal type.


The Verifier can assess a sample in less than one second without affecting the coin or bullion in any way. No chemicals are used, and no physical damage is done to the sample being tested. Unlike in other testing methods, plating and surface features do not significantly impact the unit's ability to measure the underlying metal. Using electromagnetic waves that penetrate deeply into the sample, plating and surface features are largely ignored, and the main body of metal is assessed. The Verifier can measure through plastic cases and bags, numismatic coins do not need to be removed from protective holders.


The user selects the expected metal type. The bar display has brackets that show the expected range of the reading for the selected metal. For example, if the user selects pure gold as the metal, and pure gold is placed on the sensor, a value within the brackets will be shown. Virtually any other metal with a similar weight will fall far outside this range. If the actual reading does not correspond to the expected reading, the bar display will indicate the sample is questionable or not genuine.


Many standard metals are stored in the Precious Metal Verifier and can be selected by the user. For gold coins the user can select pure gold, 22 K gold, 90% gold, American eagle gold, gold ducat and Britannia gold ranges; for silver coins the user can select pure silver, sterling silver, 90% silver, 80 % silver and Britannia silver. Pure platinum, palladium, rhodium, and copper also have stored values. Each of these coin and bullion metals will produce an acceptable range on the Precious Metal Verifier. Even small changes in alloy make a big difference in the readings on the Precious Metal Verifier.

Bullion wand

The Bullion wand can measure surface resistivity to a depth of at least 1.5mm (0.06in).

Large wand

The Large wand is used for coins weighing 1/4 ounce and larger. It is useful for rapid checking of many samples in a short time.

Small wand

The Small wand allows for testing of coins down to 1/10 ounce coins, CombiBars, 1 gram bars, and similarly small samples. Use the included calibration disk behind your sample for especially thin samples to get the most accurate reading.

Copyright © 2020 Sigma Metalytics LLC - All Rights Reserved
Contact Us:
info@sigmametalytics.com
(530) 562-4589
562 Manzanita Avenue
Suite 1
Chico, CA 95926
Large Wand